Description

The BandwidthSet command is used to set a sensor's cut-off frequency divider, i.e., bandwidth.

Protocol

This command uses the Command-Ack protocol.

Command

Byte Name C Type Value
0 Control Byte ( Packet Type (7:5) / SubSystem (4:0) ) uint8_t 0x4D ( 0b010 / 0b01101 )
1 Payload Length uint8_t 4
2 CRC uint8_t Calculated
3 Command uint8_t 0x06

Payload

Byte Name C Type Value
4 - 5 Sensor Type uint16_t Varies
6 - 7 Bandwidth uint16_t Varies