Description

The MotionAnalysisStream command is used to enable or disable the streaming of the motion analysis.

Protocol

This command uses the Command-Ack-Response protocol.

Command

Byte Name C Type Value
0 Control Byte ( Packet Type (7:5) / SubSystem (4:0) ) uint8_t 0x41 ( 0b010 / 0b00001 )
1 Payload Length uint8_t 1
2 CRC uint8_t Calculated
3 Command uint8_t 0x19

Payload

Byte Name C Type Value
4 State uint8_t 0x00 (Disable) or 0x01 (Enable)

Response

Header

Byte Name C Type Value
0 Control Byte ( Packet Type (7:5) / SubSystem (4:0) ) uint8_t 0x01 ( 0b000 / 0b00001 )
1 Payload Length uint8_t 4
2 CRC uint8_t Calculated
3 Command uint8_t 0x19

Payload

Byte Name C Type Value
4 - 5 Downsample uint16_t Varies
6 - 7 Rate uint16_t Varies